ODIS 5.2.6混淆数据库
本帖最后由 barthox 于 2020-5-23 07:33 编辑ODIS 5.2.6混淆数据库
Hello collaborators, I'm having trouble starting or diagnosing with fault-driven localization in ODIS 5.2.6 postsetup 98.0.210.
PROBLEM
The problem is that it does not automatically recognize the vehicles: FOX, GOL, SAVEIRO and VOYAGE, although the identification is done manually, a list of models does not include the models used 5U and 9B. But in ODIS Engenharia 11 and ODIS 5.1.6 everything works perfectly.
TEST
Starting the diagnosis
See what the chassis is automatically identified:
But when starting the diagnosis * the following happens:
* the ignition is on! The software does not recognize the ignition status of FOX, GOL, SAVEIRO and VOYAGE vehicles.
Even forcing the identification manually *:
* Type 5U and 9B vehicles are not included in the model list.
We will continue with an option 'Remaining passenger vehicles':
The location begins to suspect:
When finalizing the location, only the engine electronics is available:
The rest (panel, immobilizer, BCM) is unavailable:
However, ODIS Engenharia 11 and ODIS 5.1.6 * recognize everything normally:
* Installed on the same computer, tested and working.
Suggestion
Some way to edit the DIDB, configure ODIS, include projects (ODX, MDX).
I'm going to update photos and solutions here, because I need help and I'm working on it.
Thank you all!
路过 畅行大众 发表于 2020-5-24 22:54
路过
问题在于安装Postsetup，安装语言英语（GB）和德语（DE）。请参加考试！
页:
[1]